FRANKEN FILTERTECHNIK KG
Max-Planck-Str. 7 ▪ D-50354 Huerth
Phone:
 +49 (0)2233 97440-0
Fax: +49 (0)2233 97440-40
E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Druck

References

Phase Separator

  • PTX 300
  • PT1100
  • PT 200
  • MPT 1800
  • MPT 104-C
  • PTX 800-D
  • MPT TM 3800/90-C
  • PTX 600
  • PTX 1200
  • PTX 1000 / PTX 800
  • PTX 600-D
  • PTX 1800
  • PTX 700
  • MPT 052
  • MPT 212 / MPT 208
  • MPT 2000
  • MPT 1800C

PTX 300 gr   PT-Phase Separator (Coalescer) for the separation of dispersed lubricant from liquid gas
Type:   PTX 300
Flow rate:   4.3 m³/h
Efficiency:   Size of separation droplet: 0.7 μm
Separation efficiency: 99.95 %
Materials:   Vessel: stainless steel 1.4541
Phase separation stage: stainless steel 1.4541
Coalescence medium: stainless steel micro-fiber
Miscellaneous:   Design pressure 80 barg
max. lubricant viscosity 3700 mPas
incl. measuring instruments for differential pressure and separation layer
Location:   Germany
     
     
PT Phase Separator PT 1100 Separation of an organic phase from sulfuric acid (30%)
Series, Type PT 1100
Flow rate: 14 m³/h
Efficiency: Size of droplet separation: 1.0 µm
Separation efficiency: 99.93 %
Materials: Vessel: Mild steel, internal coating ETFE (s>2.5 mm)
Phase separation stage: PTFE, Microfiber from borosilicate glass
Miscellaneous: - internal coating with extreme barrier properties
- vessel according to Chinese Special Equipment License Organization,
  Level D1/Category I
Location: P. R. China
Phase Separator PT 200 Separation of water from highly viscous white oil
Type PT Phase Separator 200
Flow rate: 0,7 m³/h
Efficiency: Size of separation droplet: 1.5 µm
Separation efficiency: 96.9 %
Materials: Vessel: stainless steel 1.4517
Phase separation stage: stainless steel, micro fiber from aramid fiber
Miscellaneous: - viscosity of main phase 132 cP
- 2-stage pre-filtration with bag filter(30 μm, ß100) and reversible element filter (1 μm, ß5000)
Location: Germany

Phase Separator MPT 1800

MPT Phase Separator (Coalescer) for the separation
of dispersed fatty acids from acidic glycerin water (90°C, ≤ 20mPas)
Type: MPT 1800
Flow rate: 10.0 m³/h
Efficiency: Size of separation droplet: 50 μm
Separation efficiency: 99.99 %
Materials: Vessel: carbon steel S235JRG, inner coating: ETFE
Phase separation stage: Titan, PVDF
Miscellaneous: integrated separation layer regulator
Location: South America

Phase Separator MPT 104 C MPT Phase Separator (coalescer)
for the separation of dispersed paraffin oil from acidic wastewater
Type: MPT 104 C
Flow rate: 8 m³/h
Efficiency: Size of separation droplet: 11 μm
Separation efficiency: 99.98 %
Materials: Vessel: Carbon steel S235JRG, inner coating ECTFE
Phase separation stage: PVDF, PEEK
Miscellaneous: integrated pump device for wastewater and oil
Gas-proof, layout +/- 50 mbar
Location: Germany

PT Phase Separator PTX 800 D PT Phase Separator (coalescer)
for the separation of finely dispersed aqueous sulphuric acid from biodiesel 
Type: PTX 800-D
Flow rate: 11.5 m³/h
Efficiency: Size of separation droplet: 1 μm
Separation efficiency: 99.8 %
Materials: Vessel: carbon steel with internal coating ECTFE
Phase separation stage: PVDF
Coalescence medium: micro glass fibers
Miscellaneous: switchable prefilters
Location: Austria

MPT Phase separation stage TM 3800/90-C
MPT-Phase separation stage for the separation of glycerin droplets from methyl ester
Type TM 3800/90-C
Flow rate 35,0 m³/h
Content of secondary phase 4,0 m³/h
Separation efficiency all glycerin droplets with d > 25 µm
Materials Phase separation profiles: PP
Supporting parts: carbon steel
Miscellaneous Retrofitting into a storage tank (Ø 3800 mm) vertically flowed through
Integrated redirection of flow, the phase separation stage is horizontally flowed through
Location Germany

PT Phase Separator PTX 600 PT Phase Separator (coalescer)
for the separation of finely dispersed extractant from wastewater
Type: PTX 600
Flow rate: 6 m³/h
Separation efficiency:   Size of separation droplet: 1 μm
Separation efficiency: 99.98 %
Materials: Vessel: stainless steel AISI 316Ti
Phase separation stage: stainless steel AISI 316Ti
Coalescence medium: micro stainless steel fibers
Miscellaneous: Integrated prefilter with filter elements (5 ?m)                 
Location: Germany

Phase Separator PTX 1200 PT Phase Separator (coalescer) for the separation of finely dispersed gasoline
droplets from process water
Type: PTX 1200
Flow rate: 36 m³/h
Separation efficiency: All droplets of the organic phase with d > 1 µm
Materials: Vessel made of carbon steel P265 GH
Phase separation stage made of stainless steel 1.4571
Coalescence medium made of stainless steel microfibers
Miscellaneous: Pre-filter, reversible, with filter elements
Location: Germany

Phase Separators PTX 1000 and PTX 800 PT Phase Separator (coalescer) for separation of finely dispersed extractant from wastewater PT Phase Separator (coalescer) for separation of finely dispersed water from extractant
Type: PTX 1000 PTX 800
Flow rate: Max. 20 m³/h 8 m³/h
Separation efficiency: All droplets of organic phase with d > 1 μm All droplets of aqueous phase with d > 1 μm
Materials: Vessel: stainless steel AISI 316Ti Vessel: stainless steel AISI 316Ti
Phase separation stage: stainless steel AISI 316Ti Phase separation stage: stainless steel AISI 316Ti
Coalescence medium: micro-glass fibers Coalescence medium: micro-glass fibers
Location: P. R. China Austria

PT Phase Separtor PTX 600 D PT Phase Separator (coalescer)
for the separation of finely dispersed glycerin from methyl ester
Type: PTX 600-D
Flow rate: 8 m³/h
Efficiency: Size of separation droplet: 1 μm
Separation efficiency: 99.9 %
Residual content: < 9 ppm wt
Materials: Vessel: stainless steel AISI 321
Phase separation stage: stainless steel AISI 316Ti
Coalescence medium: micro stainless steel fibers
Miscellaneous: Trace heating system for the separated glycerin
Location: Germany

Phase Separator PTX 1800 PT Phase Separator (coalescer) for the separation of finely dispersed water
from organic phase
Type: PTX 1800
Flow rate: 160 m³/h
Operating temperature: 85 °C
Separation efficiency: All droplets of aqueous phase with d > 3 μm
Materials: Vessel: stainless steel AISI 316Ti
Phase separation stage: stainless steel AISI 316Ti
Coalescence medium: micro-stainless steel fibers
Miscellaneous: Pre-filter (bag filter)
Heat insulation phase separator + pre-filter
Location: Belgium

PT Phase Separator PTX 700 PT Phase Separator (coalescer)
for the separation of finely dispersed water from liquid gas/aldehyde
Type: PTX 700
Flow rate: 15 m³/h
Efficiency: Size of separation droplet: 1 µm
Separation efficiency: 99.99 %
Materials: Vessel: stainless steel AISI 321
Phase separation stage: stainless steel AISI 316Ti
Coalescence medium: micro stainless steel fiber
Miscellaneous: Design pressure 100 bar for vessels
Standort: Germany

MPT Phase Separator MPT052 MPT Phase Separator (coalescer)
for the separation of toluol from wastewater
Type: MPT 052
Flow rate: 2 m³/h
Separation efficiency: Size of separation droplet: 10 µm
Separation efficiency: 99.5 %
Materials: Vessel: stainless steel AISI 316Ti
Phase separation stage: stainless steel AISI 316Ti
Miscellaneous: Rectangular vessel with top cover for overpressure 0.5 bar
Location: Germany

MPT Phase Separator MPT2012 / MPT208 MPT Phase Separator (coalescer)
for the separation of glycerin droplets from methyl ester
Type: MPT 212, MPT 208
Flowrate: 18 m³/h
Efficiency: Size of separation droplet: 25 μm
Separation efficiency: 98.5 %
Materials: Vessel: carbon steel S235JR
Phase separation stage: PP
Miscellaneous: Trace heating system for the separated glycerin
Location: India

MPT Phase Separator MPT 2000 MPT Phase Separator (coalescer)
for the separation of dispersed hydrocarbons from wastewater
Type: MPT 2000
Flow rate: 200 m³/h
Efficiency: HC residual content at outlet < 10 ppm
Separation efficiency: 99 %
Materials: Vessel: carbon steel S235JR
Phase separation stage: PP
Miscellaneous: Phase separation stage on rollers
Location: Germany

Phase Separator MPT 1800 C MPT Phase Separator (coalescer) for separation of silicone oil droplets
from hydrochloric acid (concentration ? 37 %)
Type: MPT 1800-C
Flow rate: 85.0 m³/h
Secondary phase: 8.9 m³/h
Separation efficiency: All silicone oil droplets with d > 30 µm
Materials: Vessel: carbon steel
Vessel lining: PVDF, s ≥ 3 mm
Phase separation stage: PVDF, PEEK, ECTFE
Miscellaneous: Water supply into the interface
Location: P. R. China

Reverse Flow Filtration Plants

  • RFA 600-14000
  • RFA 600-14000
  • ASF 2 x 20 – 15000

Reverse Flow Filtration Plant RFA 600 14000 Reverse flow filtration plants for roll texturing machines
Type: RFA 600-14000
Medium: Mineral oil
Solid material:   Roll particles, copper
Filter capacity: 48 m³/h
Grade of filtration: 1 µm
Miscellaneous: - solid dryer for backflush liquid
- integrated cooling plant for filtrated oil
- fully automated operation
Plant 1 (blue): Standard design
Plant 2 (green): Design according to Japanese regulations
- pressure test of all components guiding the medium
- non-destructive testing (visual, penetration, magnetic and X-ray test) of all welded joints of oil vessel (156,000 l)
- all electrical components with ATEX certificate
Location: India (Plant 1), Japan (Plant 2)

Reverse flow filtration plant RFA 600-14000 Reverse flow filtration plant for roll texturing machine
Type: RFA 600-14000
Filter capacity: 48 m³/h
Grade of filtration: 1 μm
Miscellaneous: - automatic vacuum belt dryer for reverse flow liquid
- integrated cooling plant for filtrated oil
- fully automated operation
Location: Taiwan

Settling Filter Plant ASF 2x20 15000 Final assembly of a settling filter plant for roll texturing machine
Type: ASF 2 x 20 – 15000
Filter capacity: 2 x 40 m³/h
Grade of filtration: 1 μm
Miscellaneous: - automatic vacuum belt dryer for the filter aid
- semi-automatic sack loading station for the filter aid
- storage funnel and dosing plant for the filter aid
- integrated cooling plant for the filtered oil
- fully automated operation
- explosion-proof layout
Location: Japan

Special Plants

  • MPT 1000x
  • 2 x KMS 1600
  • RA-4
  • Components for a Biodiesel Plant

Mixer-Settler MPT 1000x Mixer-Settler with plate internals for the separation of a 10 % sulfuric acid and a higher-viscous organic liquid
Type: MPT 1000x
Flow rate: 3.0 m3/h – 9.0 m³/h
Materials: Vessel made of carbon steel; where touched with the product, surfaces are coated with ECTFE (s > 500 ?m, electrically conductive)
Phase separation stage made of stainless steel 1.4539 and PVDF
Miscellaneous: - mixing chamber with disc mixer
- double baffle
- 2-stage phase separation internals
- handling system for mounting of phase separation internals
- total length of the plant approx. 11.5 m
Location: Belgium

Katalyst mixing station 2 x KMS 1600 Catalyst mixing station for the production of Biodiesel
Type: 2 x KMS 1600
Circulation capacity: 2 x 30 m³/h
Material: Carbon steel
Miscellaneous: - Explosion supported design
- 2-stage mixing mode operation
Location:
 Germany

Plant RA-4   Plant for washing and purification of FTC phase separation elements
Type: RA-4
Circulation capacity: 2,4 m³/h
Material: Stainless steel AISI 316Ti
Miscellaneous: - heated storage vessel for the purging liquid
- integrated filter
Location: Germany

Ion-exchange plant Components for a Biodiesel Plant
Back side:   6x 4-stage ion exchanger plant for the purification of Biodiesel
Front side:   2x catalyst mixing station (caustic potash solution, methanol)
of Biodiesel
Production capacity: 180.000 tons per year (60 MMgy)
Miscellaneous: - manufactured according to US standards       
  - explosion-proof layout
Location: USA